How Can I Fix Ink Cartridges That Say “Low Ink”?

Using remanufactured ink cartridges often results in your printer showing erroneous ink levels. So don’t worry!

Therefore, if you’ve just encountered a technical problem and need the Mutoh Printer Repair Service to handle it, get in touch with us right away. Contact our team by phone at (928) 514-2464 or via email at info@a1printerrepair.com. We’ll make sure you get the greatest outcome as quickly as we can.

Neglect the error message.

Before we go into depth on why it happens, the good news is that you can safely disregard this error message as long as the printer prints properly. To continue printing, just select “OK” (or “Continue”) on your printer.

Reset

Usually, a quick reset procedure will fix the issue if your printer won’t let you print.

  • Delete the cartridge.
  • halt the printer,
  • Take out the power adapter,
  • Reconnect the plug after 5 to 15 seconds.
  • re-turn the printer on
  • Put the cartridges back in

Your printer must now allow you to print after the above reset procedure. Reinstall the printer driver if the printer still won’t let you print following the reset procedure.

You might still get the “Ink Low” message after resetting and installing the device, though. Every printer ink cartridge has been fully refilled. The cartridge’s chip was unable to be reset, which is why you are reading this message. The message can therefore be ignored.

Why Does the Low Ink Error Message Appear?

Typically, there are two reasons why you might be receiving this error message.

The cartridge is not correctly placed, to start. Ensure that the protective tape is taken off before installing the new ink cartridge. The ink port and electrical contacts of the cartridge are often covered by the tape.

Second, the fact that the cartridges are remanufactured is the only reason the error message appears. The original cartridges contain unpresentable circuits that keep track of how many pages were printed. As a result, even though the cartridges are not empty, the printer reads the chips and indicates that they are empty. This explains why, despite the ink tank being full, you are still receiving the “ink low” indication. Manufacturers of printers take special care to guarantee that this message is displayed on the printer. But as we all know, genuine ink cartridges are much too pricey and unquestionably not the most economical option for businesses.

The printer’s displays or the computer screen may both display the empty ink cartridge warning. “No cartridge,” “poor ink,” “cartridge not recognised,” and other messages may appear, indicating that the new cartridges are the source of the issue. You can happily print in any of these situations without thinking about the error notice…

Leave a Reply

Your email address will not be published. Required fields are marked *